Reach us here or email info@4x4downunder.com.au
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm (W) x 1358mm (L). The Slimline II Tray and four (4) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.
NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:
Material used:
Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel
Approximate Installed Weight 20kg
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm) to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm) to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm) to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm
Length 1615mm
Height 140mm
Shipping Weight:
Weight 23.1kg
We're Australians, and we like to support our fellow Australians, which is why all our products are sourced locally from the official Australian distributors. Nothing is imported directly and we don't stock any grey imports. This also means that all manufacturer warranties are fully honored by the brands themselves.
This is one big recovery thimble, looks super tuff.
The soft shackle is well constructed and super tough.
Can't wait to try them out.
Great product nice and compact and in a great case
Excellent quality product. Very good value for money. Easy to install works great with the Boab 40 litre tank.
Well packaged with speedy delivery.
Great quality, purchased the pump and fitting kit as well. Easy to install in our new Lions Club BBQ trailer. Great quality, value for money, well packaged and speedy delivery.
Warn VR EVO Winch Hawse Fairlead | 104219
The winch is good but had to upgrade the wiring that came with it. The winch hit a peak of 125 amps pulling my 5 mtr side console onto the trailer.
It seemed to do it easy, but the standard wiring was way too hot afterward for my liking.
I use my boat a lot so I wanted to make sure the winch could pull all the power it wants with no issues.
Batteries supplying the winch are 2 x 200-amp hour lithium’s (LifePo4) wired in parallel that give a combined continuous peak amp output of up to 205 amps for 5 mins.
Upgraded all the wiring to 0 AWG ultra-high current marine power cable capable of handling 200amps and changed over to 175 amp rated Anderson plugs.
Housed the solenoid and rocker switch in a waterproof switch box with cable glands for cabling and mounted it to the trailer.
It wasn’t cheap at around $600 for the upgraded cabling, terminal lugs, heat shrink and waterproof housing, but it was well and truly worth it.
Went away fishing and put the boat on and off the trailer everyday for 8 days. At one particularly steep ramp with wind and current playing havoc the winch didn’t miss a beat.